Frequently asked questions about Deco Mesh Wi-Fi

If you are looking for more details, kindly visit decorative mesh company.

Q&A of functional explanation or specification parameters

Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device and check either the Datasheet or the firmware section for the latest improvements added to your product.

Deco E3(3-pack) , Deco X20 , Deco M1300 , Deco HC4 , Deco X25 , Deco X3600(2-pack) , Deco Voice X50 , Deco E4R , Deco E4S , Deco X4300 Pro , Deco M9 Plus(1-pack) , Deco X60(3-pack) , Deco W6000 , Deco X3600 , Deco M5(3-pack) , Deco X50-PoE , Deco M4(2-pack) , Deco S4(2-pack) , Deco M1300(1-pack) , Deco W7200 , Deco P9 , Deco X68(1-pack) , Deco P7 , Deco X20-DSL , Deco E4(3-pack) , Deco X20-4G , Deco PX50 , Deco BE95 , Deco S7 , Deco X76 Plus , Deco S4 , Deco M4(1-pack) , Deco X20(2-pack) , Deco X90 , Deco W2400 , Deco X95 , Deco X96 , Deco E4(2-pack) , Deco W6000(2-pack) , Deco X20(1-pack) , Deco X68(3-pack) , Deco XE75 Pro , Deco XE200 , Deco M9 Plus , Deco M3W , Deco M1300(3-pack) , Deco W3600 , Deco X68(2-pack) , Deco X50-DSL , Deco X68 , Deco X58-4G , Deco M5(1-pack) , Deco X5700 , Deco S4(3-pack) , Deco M4(3-pack) , Deco XE5300 , Deco M5 , Deco M4 , Deco HX20 , Deco XE75 , Deco M3 , Deco X75 , Deco X20(3-pack) , Deco M5 Plus(3-pack) , DecoX5700 , Deco X50-4G , Deco S7(3-pack) , Deco X3600(3-pack) , Deco E3(2-pack) , Deco W2400(2-pack) , Deco BE85 , Deco X50-Outdoor , Deco Voice X20 , Deco X73-DSL , Deco X50-5G , Deco X5400 Pro , Deco X80 , Deco X60(2-pack) , Deco HB6300-PoE , Deco X60(1-pack) , Deco X68(1 pack) , Deco 5G , Deco M5 Plus , Deco P7(2-pack) , Deco S4(1-pack) , Deco X50 , Deco X55 , Deco E4 , Deco E3 , Deco BE63 , Deco HB6300-Outdoor , Deco BE65 , Deco M9 Plus(2-pack) , Deco X80-5G , Deco M5(2-pack) , Deco X55 Plus , Deco X5700(2-pack) , Deco S7(2-pack) , Deco AC1200 , DecoX5700(2-pack) , Deco X60

This Article Applies to:

Before You Buy

1. Choosing the best Deco product for you?

https://www.tp-link.com/support/faq/3735/

2. What are the differences between the various Deco models?

Please refer to the FAQ below:

https://www.tp-link.com/en/support/faq/2423/

3. What are the benefits of a Deco Mesh system?

A Deco Mesh system is a Mesh router system that adapts with you as your Wi-Fi needs change.  For all the details on the benefits of a Deco system, please refer to: https://www.tp-link.com/whole-home-mesh/

4. Can Deco work without a modem?

No, like a traditional router, a customer will need a modem, gateway or ONT to use a Deco system.

5. Can Deco work with existing home routers?

Yes, Deco can connect to your existing home router via an Ethernet cable to access the internet.

*Note: It is recommended to use AP mode when connecting Deco to the existing router.  

6. What are the advantages of Deco models that support HomeShield?

HomeShield is a built-in home networking protection software suite that covers network security, parental controls, and QoS, and provides comprehensive reports. For more details, please refer to: https://www.tp-link.com/homeshield/

7. Can I manage my Deco network remotely?

Yes, the Deco system can be managed remotely on the Deco App as long as the network is online.

8. Will Deco Wi-Fi Backhaul, Ethernet Backhaul, and PLC Backhaul work together?

PLC and Wi-Fi backhaul will work together at the same time.  Ethernet backhaul will not.  If a customer uses Ethernet backhaul then only it will be active.  PLC and Wi-Fi will not be enabled if there is an Ethernet connection between nodes.

9. Can Deco be mounted on the wall?

Only the Deco X50-POE and Deco X50-Outdoor support mounting

10. Does Deco support MU-MIMO

Yes, but support varies by model. You can go to TP-Link's official website to see what models have support for MU-MIMO

 

 

Network Configuration

1. Do I need to create a TP-Link ID/Account to configure the Deco Mesh system?

Yes, Deco Mesh systems require a TP-Link ID to set up and manage the system.  To learn more about TP-Link IDs, please refer to: https://www.tp-link.com/support/faq/1439/

2. Can I share my Deco network with other TP-Link IDs?

Yes, using a network owner’s account you can add other TP-Link IDs as a manager account using the Deco App.  For steps on this process please refer to this article: https://www.tp-link.com/support/faq/1597/

3. Can

    the Deco

    Mesh system be configured or managed on the computer or website?

No, Deco was designed with ease and simplicity in mind.  Thus, Deco can only be managed through the Deco App.

4. Can I set up Deco as an extender to bridge/extend my existing home Wi-Fi network?

No, Regardless of what mode you use, the main Deco must stay connected to your home modem/router via an Ethernet cable to act as a main unit. Other Deco units can connect to the main Deco wirelessly.

5. Can Deco work with other mesh systems?

No, TP-Link Deco Mesh Systems are only compatible with other TP-Link Deco units.

For more details, please refer to: https://www.tp-link.com/support/faq/3749/

6. How many Deco networks I can add to the Deco app?

There is no limit on how many separate networks can be managed or owned through the Deco App

7. How many Deco units can I add to my Deco mesh network?

In most cases, we recommend 10 or fewer Deco units for a single network.

8. Can different Deco models work together?

Yes, for the details, refer to FAQ2248

9. Can I enjoy all features supported by the main Deco If different Deco models work together?

No, the following feature requires support on the individual node as well.

• •IoT Network

• •6GHz Band

• •Signal Source

• •Wi-Fi Access Control

10. Can multiple accounts manage a Deco network at the same time?

No, to ensure network security and stability only 1 management account can access the system at a time.

11. How can I switch the main Deco without resetting the whole Deco system?

You have the option to change the Main unit through the Deco App.  Follow this FAQ for guidance: https://www.tp-link.com/support/faq/2400/

12. Can I change the WAN parameters of the Deco system?

Yes, you can change them in the Deco App. Please open Deco App->go to More->Internet Connections->IPV4->Tap Internet Connection Type.

13. Can Deco PX50 build PLC Backhaul with Deco P9 and P7?

No. Deco PX50 uses the G.hn powerline standard while Deco P7/P9 uses the HomePlugAV powerline standard.  They are not compatible with each other.

However, the Deco P9 and Deco P7 can build the Powerline Backhaul together.

14. Can the Deco system connect with the existing powerline network directly to access the internet?

While it is possible it is not recommended to connect a Deco system through an existing powerline network directly. If PLC is the best choice for your network environment it is recommended that you  use the Deco PX50.

 

Basic & Advanced Function

1. Some Deco models show tri-band or quad-band, what does that mean?

This indicates the Deco model supports 3 or 4 separate Wireless network bands.  For Wi-Fi5 and Wi-Fi6 Decos, you will have access to 1 2.4GHz and 1 5GHz band.  An additional 5GHz band is available but used exclusively for Wireless Backhaul traffic. 

Wi-Fi6e and Wi-Fi7 Decos will provide 1 2.4GHz, 1 5GHz, and 1 6GHz band.  The 6GHz will by default be set to Backhaul only but can be set for clients and backhaul through wireless settings.

Quad-bands offer 1 2.4GHz, 1 or 2 5GHz, and 1 or 2 6GHz bands, depending on the model.

2. What features do Deco QoS and parental control support and what are their advantages?

   Related links:
   Exploring the Strengths of 28mm Hot Rolled Thread Bar

   Want more information on steel wedge supplier? Feel free to contact us.

QoS (Quality of Service) is an advanced feature that helps you set priority for specific applications and devices so that they can perform better with lower latency.

Parental Controls allow you to filter online content for your children, control when they can access the internet, restrict the total time they spend online each day, and track the websites they visit and apps they use.

To get more details about the two functions, please refer to:

https://www.tp-link.com/support/faq/1598/

https://www.tp-link.com/support/faq/1601/

3. Does Deco support the Address Reservation function?

Yes, Deco products support reserving IP addresses for clients. For more details about this function, please refer to: https://www.tp-link.com/support/faq/1795/

4. Are the guest network and main network isolated on the Deco?

When Deco is set in Router mode, the guest network and main network are isolated.

When Deco is set in AP mode, the network isolation feature must be enabled or disabled in the Deco app.

5. What’s the difference between the Access Point mode and the Router mode of the Deco?

Please refer to: https://www.tp-link.com/en/support/faq/2399/

6. Does Deco support IPv6? How can I enable it?

Yes, Deco does support IPv6 but it's disabled by default. To enable it, go to More->Advanced->IPv6 on the Deco app. For more details, please refer to: https://www.tp-link.com/support/faq/2642/

7. How Do you change the DNS settings on Deco?

For steps to change DNS settings refer to: https://www.tp-link.com/en/support/faq/1855/

8. Can Deco work with third-party VPN service providers?

Yes, There are Deco models available that support the VPN client feature. To get the exact supported model, please refer to: https://www.tp-link.com/en/home-networking/deco/?filterby=AND%7C6356

9. How should I change Deco’s wireless settings?

To change Wireless settings please refer to: https://www.tp-link.com/support/faq/1591/

10. Can I set different SSIDs for 2.4ghz and 5ghz of the Deco network?

No, 2.4ghz and 5ghz share the same SSID and password on Deco’s network and there is no way to split them into separate networks. 

11. Can we change the channel/channel width of the Deco network?

With a few exceptions that allow you to change the 5GHz channel width, channel, and channel width decisions are made by the system and based on network conditions. 

12. Does the Deco mesh system support working with VoIP phones?

Yes, the Deco system can provide internet for Ethernet-based VoIP phones.

13. Does Deco support port forwarding?

Yes, here is the guidance: https://www.tp-link.com/support/faq/1797/

 

 

Other

1. Does Deco support IGMP v1/v2/v3? Does Deco support IGMP snooping?

Deco supports IGMP v1/v2/v3. Deco supports IGMP snooping in both router mode and access point mode. IGMP snooping is enabled by default.

2. Can Deco be powered by POE?

Currently, the Deco X50-POE and Deco X50-Outdoor support POE.

3. How much power consumption does each Deco take?

We can calculate the theoretical maximum power consumption based on the output voltage and current parameters of the power adapter. However, the actual power consumption should be lower than this value.

4. Can I use a DC extension to extend the cable length of the original power adapter?

Normally, we don't recommend using an extension cable due to some possible risks.

1. The quality of the extension cable is uncontrollable, if the contact resistance of the interface is too large, it will cause the interface to heat up and cause safety hazards.

2. The increase in cable loss will increase the output power of the power adapter, resulting in a decrease in the life of the power adapter. If the rated power of the power adapter is exceeded, safety hazards will occur.

If the customer insists on an extension cable, we can provide the parameters of the power cord. However, any problems caused by the extension connection will violate our warranty.

The parameter of the power interface (Male Size)

inner diameter: 2.1mm

outer diameter: 5.5mm

copper column length: 9.0mm

 

For more specific Q&A about the Deco issue, please refer to:

General question about the Wi-Fi range of Deco

https://www.tp-link.com/support/faq/2716/

General Questions about Deco X50-Outdoor

https://www.tp-link.com/support/faq/3611/

Common Questions Regarding Wi-Fi 6E Deco

https://www.tp-link.com/support/faq/3271/

General questions about the Ethernet Backhaul feature on your Deco

https://www.tp-link.com/support/faq/1794/

General questions about the Smart Actions feature in the Deco app

https://www.tp-link.com/support/faq/3269/

Common Questions on TP-Link Wi-Fi 7 Wireless Router and Deco Products

https://www.tp-link.com/support/faq/3594/

General Questions about the Powerline or PLC Backhaul Feature of Deco

https://www.tp-link.com/support/faq/2401/

 

 

Stainless Steel Architectural wire mesh is a series of high-tensile, grade 316 stainless-steel wires interlocked together and is commonly produced from 70% recycled material. The individual wires are woven on large weaving looms at Haver & Boecker, our German-based parent company, using a similar technique used to make clothes.

While it appears rigid and unyielding, stainless steel architectural mesh proves to be fairly flexible when a certain length is reached. Because of this characteristic, architectural mesh panels can be applied to countless applications.

 

Mesh Types

The term weave type refers to the way in which the warp and weft wires cross each other. It encompasses four different mesh categories: Woven wire, Cable, Fine, and Specialty.

Woven wire

Wire mesh is best defined as an assortment of rigid wires that have been woven together to form a sheet of mesh that is interlaced.

Cable Mesh

Cable mesh is a mesh type that is woven on a specialized weaving loom, much like woven wire. The key difference between the two is that cable mesh uses cables rather than stainless steel wires in the warp (vertical) direction.

Fine Mesh

Mesh profiles that are constructed out of wires that have a very small wire diameter. Fine mesh is particularly sensitive when introduced to mechanical stresses. That said, the application of the mesh is a key factor when classifying fine mesh.

Specialty Mesh

Specialty mesh is a mesh that features a unique pattern and carries the characteristic of employing several different wire types.

How Is It Made?

 

A weaving loom that is specifically designed to properly weave stainless steel wires is employed to weave architectural mesh. These looms consist of a warp beam, heddle frames (predetermined amount), a reed, a rapier band, and a front take-up mechanism.

The warp wires are the wires that run lengthwise and are fed directly from the warp beam.

The weft (or shute) wires are the wires that run across the width of the cloth during the weaving process.

The warp beam is a cylindrical drum that is wound with a specific number and length of warp wires depending on the mesh profile and size of the mesh panel. These specifications are calculated prior to winding the wires.

Heddle frames are holders used to separate the warp wires. Each loom contains at least two heddle frames. In a loom that uses two heddle frames, heddle frame 1 initially lifts half of the warp wires while heddle frame 2 pulls the other half down. The heddle frames switch positions after the weft wire is driven between the two sets of warp wires.

A rapier band is the mechanism that drives the weft wire between the two sets of warp wires after each heddle frame cycle.

A reed is the instrument that holds the warp wires in the desired spacing while also driving the weft wire into position.

Lastly, the finished roll of woven wire cloth is wound onto a front take-up mechanism and is removed in increments needed by the framing system of the project.

What Does the Weaving Process Look Like?

Once the beam is wound, and the heddle frames and reed are threaded, the whole assembly is transported to a weaving loom. The setup of the loom is then completed by a dedicated technician.

Once assembled, the weaving process is virtually automatic and seamless.

As the loom starts up, the warp beam begins to unwind in very small increments. The front take-up mechanism simultaneously winds the woven cloth at the same small increment in the same direction.

This movement allows the loom to maintain specific tensioning, which is critical when producing high-quality mesh panels.

As the two beams rotate, heddle frame 1 pulls half of the warp wires up while heddle frame 2 drives the other half down. It's at this point that the rapier, whether a two-part or one-part rapier, drives a weft wire between the two sets of warp wires.

Each weft wire is delivered from a separate spool of wire located at the side of the loom. As the rapier returns to its resting position to gather another weft wire, the reed pushes the latest weft wire into its final position.

This process is what creates the precise cross-sections needed to create the perfect aesthetic.

Once the weft wire is in place, the reed returns to its original position. The warp beam and front take-up mechanism then rotate at the same small increment, the heddle frames change position and the loom begins a new cycle.

These simultaneous movements are repeated over and over until the entire mesh cloth is woven.

For more wholesale perforated metalinformation, please contact us. We will provide professional answers.