Mechanical Parts & Fabrication Services - worldnewsblogs

Your Position: Home - Mechanical Parts & Fabrication Services

By Marie

What Is Bale Clamp And Why Is It Important?

Forklift bale clamp attachments are fitted to a forklift mast in place of standard tynes and carriage. The attachment consists of two hydraulic clamps that clamp the sides of the baled product, while the rear frame of the attachment holds the load in place during transport and lifting.

59

0

0
By Hou

https://www.yjsicpump.com/news-things-you-should-know-about-ceramic-slurry-pumps.html

Ceramic slurry pump is a kind of ceramic slurry pump, which can be used as option for rubber slurry pump, metal slurry pump and so on. The main material of ceramic slurry pump is silicon carbide. Different manufacturers have different processes, mainly including resin bonded silicon carbide and sintered silicon carbide.

66

0

0
By Hou

What is a Parallel Shaft Speed Reducer?

A parallel shaft speed reducer, also known as a gear reducer or gearbox, is a mechanical device that reduces the rotational speed of a motor or other power source. It does this by increasing the torque, or rotational force, of the output shaft.

59

0

0
By Marie

Why use cylindrical roller bearings?

This is because plain cylindrical bearings have more contact surface area than rolling element bearings, so loads are more evenly distributed across the surface. Cylindrical bearing applications may include applications with either radial or axial loads.

63

0

0
By Marie

Do you know the Manufacturing Method of Hydrogen Peroxide?

Alkaline Hydrogen Peroxide preparation method: quinone-containing air electrode for the production of alkaline hydrogen peroxide. It is characterized in that each pair of electrodes is composed of an anode plate, a plastic mesh, a cationic diaphragm and a quinone-containing air cathode. It is equipped with a distribution chamber for entering fluid and a collection chamber for discharging fluid.

68

0

0
By CC

Just How Tolerances Influence Injection Molded Plastics?

The tolerance stated in the plastic injection mold is an engineering requirement. In basic terms, they are allowable variants to the initial dimensions of the parts or the base dimension. As it is impossible to generate a product that purely abides by the base measurements, some leeway obtains factored into the design of items.

74

0

0
By Marie

What are Advantages of cast iron?

Cast iron is one of the most extensively used alloys of ferrous. It is made from pig iron by the process of casting and hence the name. Pig iron is placed in the furnace along with other alloying elements and melted until the molten mixture is obtained.

65

0

0
By Hou

The Wonderful World of Pressure Relief Valves

In any system where steam is generated, there is always a possibility that over-pressurization can cause a catastrophic failure of the pressure vessel. This could result in destruction of property, injury, and loss of life.

62

0

0
By Helen

Functions Of Railway Fasteners

Functions of Railway Fasteners:1. Hold rails securely in the rail seat.2. Limit the rotation of the rail about the outer edges of the rail foot.3. Minimize longitudinal movement of rails through creep and thermal forces.4. Assist in retention of track gauge.

70

0

0
By Hou

Solenoid Valve Vs Ball Valve: Primary Differences

Body parts can be made from any of these materials, including brass, stainless steel, chrome, titanium, bronze, PVC, CPVC, and PFA-lined. Ball valves also make use of a broad range of seats and seals.

69

0

0

blog title blog title

Core Max Smart Pin loaded series , the user becomes an integral part of the exercise by continuously adjusting the position of the user with the move

13

233

233

Next page
More blogs