Why is Sintered General Purpose Blade Better?

Introduction

If you're cutting concrete or stone, having the right blade is essential. Not all blades are created equal, especially when it comes to toughness and durability. A sintered general-purpose blade stands out due to its versatility. This type of blade is great for various materials, including a marble cutting blade. What other materials can it handle? Read on to find out.

Click here to get more.

Summary Answer

A sintered general-purpose blade can efficiently cut through materials like concrete, brick, granite, and marble. It is designed for heavy-duty tasks and provides precise cuts without chipping.

Materials Cut by Sintered Blades

1. Concrete

   Sintered general-purpose blades excel at cutting concrete. Their durability ensures longer blade life and cleaner cuts.

2. Brick

   These blades make quick work of brick. They provide a smooth finish, crucial for masonry work.

3. Granite and Marble

   A marble cutting blade can handle not just marble, but also granite. These materials require precision, and sintered blades deliver.

Case Study: Performance Comparison

In a controlled test, a sintered general-purpose blade was compared with standard blades on concrete and granite. The sintered blade cut through concrete in 20% less time and produced smoother edges. This performance highlights the importance of selecting the right blade for your projects.

Conclusion

In conclusion, a sintered general-purpose blade is ideal for cutting materials such as concrete, brick, granite, and marble. Choosing the right blade can make a significant difference in the quality and efficiency of your work. The durability of sintered blades ensures that you get the best results every time.

FAQ

1. Can I use a sintered blade for all types of materials?

Not all materials are suitable. While sintered blades are versatile, using them on soft materials may lead to rapid wear.

2. How do I maintain my sintered blade?

Keep the blade clean and check regularly for signs of wear. Also, avoid excessive pressure while cutting.

3. Is a sintered blade more expensive?

Sintered blades may cost more upfront, but they offer better longevity and performance, which can save money in the long run.

Have had a few questions recently about the different types of saw blades so thought it worth a post.
Essentially, there are three main types of diamond saw blades used in the lapidary field – all have their pros and cons.

A) Sintered Blades

Sometimes referred to as Continuous Rim Blades, these blades are more expensive but tend to be longer lasting and offer better performance. Sintered blades are made embedding diamond particles in a metal bond around the rim of the blade – the diamond extends through the full depth of the rim and so as the metal bond rim wears away, new diamond particles are exposed and keep the blade cutting.

These blades are available in premium or economy versions – the manufacturing process is essentially the same but a premium blade will be better quality and should give a cleaner cut.  Please note that even though the sintering process will give a more durable blade, they can easily be damaged by incorrect usage (insufficient cooling, rock jams, etc).

For smaller blades, the sintered metal bond rim will be continuous around the whole rim while for larger blades (say above 16″ diameter), there may be sections cut out along the rim to improve coolant flow and debris removal – these are called Segmented Blades.

The 301 Gemking Blade made by Barranca/MK Diamond is often called a Notched Rim Blade but this is a bit misleading.  This one is still a sintered blade but the deep notches along the sintered metal bond rim allow for better coolant flow. This blade is designed for cutting of harder material but MUST be used with oil – water should not be used with these blades. This blade is just a slightly different type of sintered blade.

As the diamond particles are embedded in a metal rim, over time the surface of the metal bond can glaze over the diamond particles and affect cutting performance.  If you feel that the blade is not cutting as it should, we recommend “dressing” the blade by cutting into it a few times with an abrasive material (ie. dressing stick, old silicon carbide wheel, house brick, etc).  This process re-exposes the diamond particles allowing the blade to cut properly again.

B) Notched Rim

A classic notched rim diamond blade is made by pressing diamond grit into the edge of a solid steel core – the process leaves small notches along the rim where the diamond works to cut the material.  This is a much cheaper process compared to sintering and so these blades are generally much cheaper.  They will not last as long but are very low cost for those on a budget.

They can be made very thin which can be useful for those cutting material where you want minimal wastage.  The notches can be very thin or slightly thicker as shown in the photo above but there will be less diamond to work with compared to a sintered blade so factor this in when considering a blade of this type.

Like the sintered blades, these ones can be dressed if they appear to be slowing down but do this only as needed as these blades are nowhere near as durable as a sintered blade.

C) Electroplated 

Electroplated blades are made by electroplating a thin layer of diamond usually in a nickel metal bond on to the surface of the steel blade. As the diamond is only adhered in a very thin layer onto the surface of the blade rim, these blades are not as durable as a sintered blade.  They are generally quite a bit cheaper than a sintered blade but will not last as long – we do feel that they are better quality than the very cheap pressed Notched Rim blades though.

XMF contains other products and information you need, so please check it out.

One advantage is that they can be made very thin so may suit applications where you want minimal wastage of valuable material.  They have also proved popular with our glass customers as a blade that cuts clean with less chipping. Generally not available in very large diameter blades and not suitable for slab saw applications.

These blades should NOT be dressed – this will just wear them out with no benefit. Make sure you are using plenty of coolant – the diamond will rip off in seconds if these blades are used dry or with insufficient coolant.

These are the three most commonly available lapidary saw blades – there are a few other less common types suitable for specialised applications (eg. CBN blades for cutting meteorites or iron-rich material).  Please consider your usage and available budget when selecting a diamond blade.  

The three most important specifications are blade diameter, blade thickness and bore size (ie. centre hole) – please note that these measurements are usually quoted in imperial measurements (inches).  See here for a quick conversion chart for relevant Metric/Imperial measurements.

If we can assist with any advice, please  us via the Contact Page.

We take all reasonable steps to keep secure any information which we hold about you. Personal information may be stored both electronically on our computer system, and in hard-copy form. Firewalls, Bit v3 SSL encryption, passwords, anti-virus software and filters act to protect all our electronic information. We do not store credit card information, we securely submit credit card information to our bank for processing.  This privacy policy sets out how we uses and protects any information that you give us when you use this website.

We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.

We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.

What we collect

We may collect the following information:

• name and job title
• contact information including address
• demographic information such as postcode, preferences and interests
• other information relevant to customer surveys and/or offers

What we do with the information we gather

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:

• Internal record keeping.
• We may use the information to improve our products and services.
• We may periodically send promotional emails and/or SMS text messages about new products, special offers or other information which we think you may find interesting using the address or mobile number which you have provided.
• From time to time, we may also use your information to contact you for market research purposes. We may contact you by , , fax or mail. We may use the information to customise the website according to your interests.

Security

We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.

How we use cookies

A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.

We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.

Links to other websites

Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.

Controlling your personal information

You may choose to restrict the collection or use of your personal information in the following ways:

• whenever you are asked to fill in a form on the website, look for the box that you can click to indicate that you do not want the information to be used by anybody for direct marketing purposes
• if you have previously agreed to us using your personal information for direct marketing purposes, you may change your mind at any time by writing to or emailing us.
• You may opt out of any promotional or SMS list at any time - just contact us to be removed from the list.

We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.

If you believe that any information we are holding on you is incorrect or incomplete, please write to or us as soon as possible at the above address. We will promptly correct any information found to be incorrect.