Questions About Lowboy Work - Tractors and Equipment

I am planning to get into the lowboy business. I have some customers already but don't have a trailer ( and am not ready for one yet).

If you want to learn more, please visit our website.

I have 3 questions 1. What make of lowboy trailer should I stay away from (and why)?

2. Do I need to carry dollar for dollar cargo insurance? If I plan to haul a $230,000 machine do I need to carry at least that much in cargo insurance?

3. I have a 98 CH with a 427 and 40,000 lb rear. It is set up for a lowboy ( 2line wet kit, rear frame crossmember support). The heaviest machine I might haul weighs about 80,000 lbs. With a 50 ton lowboy is my tractor suited to do this type of hauling??? Thanks, Rob w.

Nobody likes to tell someone else how to run their business,

but I'll give you a reply.

I see three things that you could improve on -

One: I'm not sure how you can possibly go into the equipment hauling business

without a trailer. Plan on a minimum of $50k., probably more for a new, inexpensive

detachable 30 ton unit. And, very soon, you'll need a drop-deck flat trailer and a 50 ton lowboy.

Two: Talk to your insurance man about insurance. That's what they're for.

Three: The tractor sounds adequate for most work up to 80,000 lbs., but the trailer

type and design plays a big part in the equation. Think about it.

I'm sticking my neck out a little bit here - but it sounds to me like you might want to

do some more homework before jumping in.

Trucking today is not the hook-em-up, move-em-out business that some people think

it is. New tractors are routinely over $100k, and new trailers can easily reach that mark too.

I don't need to tell you that fuel at $5.00/gallon and tires at $300 to $400/each are probably

not going to get any cheaper. (And by the way - in the lowboy business - you eat a lot of tires).

Link to longyong

And then there is the government. Around every turn, some member of the DOT, State Police,

DEC, IRS, Fuel Apportionment and thousands of others are going to try to ruin your day.

Every business, no matter what kind, needs a business plan. A well thought out and written

document of how you plan to handle all of the known obstacles. Because there a thousand unknown

obstacles that will find you when you least expect it. The business plan is the Bible of any good business.

The capital sin of most new businessmen is too little planning.

Be Careful and Be Smart.

Paul Van Scott

In my aera Lowboy work is the ideal way to make mony inthe construction bizz. Dump trucks can make steady cash but the lowboy makes more hour for hour of work.

Depending on the state or who you work for will determin the min amount of coverage needed. You likely need to add cargo insurance to your policy as you are now hauling "cargo".

The truck sounds set up for most lowboy work is it double framed? thats a bonus if so. You need to know what type of machines you will be primarly moving. Some lowboys have deeper and longer decks that may be needed for clearance of certain machines. a 20" deck may be to short for some machines so make shure you ask the customers what they have. from what I see in my aera a used lowboy ranges from 20K and up, New they are around 40K and up. The gooseneck diffrences in trailers can make life easy or hard on you depending on the set up. You will possibly find air or manual pin latching and block hight adjustments. just look at the little diffrences.

good luck

Trent Blasco

Rob,

If you are going to buy a trailer, I would go with a Rogers, Talbert, Fontaine, or Trail King. I would stay away from most everything else. In my opinion, Loaded deck height and length of the well are most important. You can fit just about everything in a trailer with 24' of open well, including 40 ton articulated trucks, but 25' to 26' would be better without getting too long. In a level deck, try to get one with 20" loaded deck height. Here in NJ, there are tons of low bridges and every inch is a mile. Also remember that most 45 Metric Ton excavators actually weigh around 110,000 lbs., so you would be over capacity on a 50 ton trailer, which is why they build so many 55 tonners now. The "boom trough" at the back of the trailer is also key, but that can be modified later.

Also, 40,000lb. rears are a little light for lowboy work. In my opinion, even is too light, but I am used to heavy spring suspension. I would rather have a truck with alot of ass then one without enough. Horsepower is no substitute for a heavy built truck.

Good Luck!

John

The company is the world’s best Lowbed Semi Trailer(pt,es,vi)(vi,ru,fr) supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

• #1

kstate90

New member

52

0

0

Location

Miltonvale, KS

Looking at buying a LB20 trailer to use on the farm to haul hay and water tanks. I plan on pulling it with a commercial semi. Is the King Pin standard size or is it the larger size? I assume they are dual voltage 24/12 volt light systems? Air brakes? I read the thread by R Racing on his trailer conversion. I don't need ramps now but could see modifying it eventually to haul tractors and equipment. I know that the trailer will most likely pitch down in the front due to the commercial semi fifth wheel plate height being lower than the military semi's. What price range should a person expect to pay for one? Say some for $.00 is that realistic? Thanks for the replies. Have a Merry Christmas.

• #2

73m819

Rock = older than dirt , GA. MAFIA , Dirty

12,195

327

0

Location

gainesville, ga.

Small pin, there is one in the classifieds

• #3

Bighurt

New member

2,347

46

0

Location

Minot, ND

If it's really an LB20 or Bravo trailer as we call it in the USAF it will sit farily level on a commercial semi. The USAF pretty much eliminated it's M series tractors years ago. Replaced by top-kicks, internationals, Ford's and now freightliners. It's straight 12 volt.

Realistic is what you think is fair, $ for a local trailer to me is fair but the farther away the more expensive that bargain gets. It costs me $.60 a mile to operate my tractor.

• #4

fasttruck

Well-known member

1,265

637

113

Location

Mesa, AZ

M270 is straight 24v only. M 127s are dual lighting systems, 800 series are 12 volt lights with provision to reduce 24v to 12 so there are two plugs on the front of the trrailer.

• #5

R Racing

Active member

2,767

16

38

Location

St. Leonard, MD

Another few things to concider.the LB20 is full on air brakes were most of the m270s are air over hydraulic.The m270 uses the 10 bolt rims same as the 5 ton, The lb20 used the ring style rim. Also the m270 has its wheels farther back then the LB 20 so it would be harder to beaver if you went that route. I paid $.00 for mine. so if you find 1 cheaper snatch it up !!

• #6

73m819

Rock = older than dirt , GA. MAFIA , Dirty

12,195

327

0

Location

gainesville, ga.

• #7

What size kingpins do the the M270A1 trailers have? 2" or 3.5"?

• #8

Bighurt

New member

2,347

46

0

Location

Minot, ND

2"

• #9

11Echo

Well-known member

2,226

96

48

Location

CT W. R.

What size kingpins do the the M270A1 trailers have? 2" or 3.5"?

Some useful info in these links.

http://olive-drab.com/idphoto/id_photos_m270_trailer.php

Attachments

• 3.3 MB Views: 39
• 1.2 MB Views: 17
• 53.4 KB Views: 61